On-Site training
If you are looking at training several people and a way to reduce the time out of the office, travel and addition expense of sending people to a class, then On-Site Training may be for you.ETECH-Trainingen offers all training course either at our Training Centers or On-Site at your facility. Please Contact our Business Support Team for details on student quantity and material discounts.
Discount
If you have 3 or more attendees or you would like to host an open enrollment class in your area/country, please Contact our Business Support Team for your personal discount.
Cable and Wire Solder Termination Operator
Course Description
ETECH’s Solder Termination Class is a one (1) day hands-on course for those who need to understand the requirements and practice the skills of the solder criteria presented in the IPC-A-620. Hands on lab will include but are not limited to wire prep of various guage wires, cup terminals, splicing etc.
Certification
At the conclusion of the Course, students must complete acceptable workmanship samples. Students who successfully complete the hands-on project are awarded an ETECH Certification valid for two (2) years. For students who have previously achieved their ETECH Certification within the last two years a relevant Recertification course/training is available.
Who this course is for
- This hands-on training is designed for anyone who need to understand the requirements and practice the skills of the solder criteria.
-
Module 1 - Cable/Wire Preparation
This module contains content that applies to all other sections of the training, a listing of applicable documents, and the handling of electronic assemblies.
-
Module 2 - Soldering of wires and connectors
This module contains process requirements and acceptability requirements for wire and cable connections made by soldering and for wire and cable connections installed into various connectors.
- General Soldering explanation (Wetting, heat transfer, Inter Metallic layers)
- Why do we use Flux
- Treating the Flux according to J-STD-004
- Solder tin/lead and lead-free
- Care and maintenance soldering tip (according to IPC 7711)
- Solder requirements of wires (according to IPC/WMA-A-620)
- Solder requirements of various connectors (according to IPC/WMA-A-620)
- Cleanliness
-
Module 3 - Splices
This module contains process requirements and acceptability requirements for wire and cable requiring splices.
-
Module 4 - Practical module: Preparation and soldering of wires and connectors
Participants will build a cable assembly by demonstrating, after instruction, the ability to:
Instructor
0.0
0%
0%
0%
0%
0%
Free
More courses you might like
Free
What you'll learn
- Function of active and passive electronic components
- Basics of conventional (Through-hole) and surface mount assembly processes
- Bill of Materials (BOM) list
- Schematic symbols
- Markings
- Orientation and polarity
Component Identification
Free
What you'll learn
-
Visual accept/reject criteria
- Base material surface and subsurface conditions
- Solder resist coverage over conductors and registration to lands
- Conductor width and spacing and annular ring requirements
- Dielectric material criteria for etchback, voids, and resin recession
- Plated-through hole requirements for copper plating thickness, voids, nodules and cracks
- Acceptance criteria for flexible, rigid-flex and metal core printed boards
CERTIFICATION IPC-A-600 CERTIFIED STANDARD EXPERT (CSE)
Free
What you'll learn
- General requirements, such as safety, tools and electrostatic discharge (ESD)
- Wire and terminal assembly requirements, demonstrations and laboratory
- Through hole technology requirements, demonstrations and laboratory
- Surface mount technology requirements, demonstrations and laboratory
- General soldered connection acceptance requirements (including Lead Free)
- Machine and reflow soldering process requirements
- Test methods and related standards
- Using statistical process control methodology
- Instructional skills and the roles and responsibilities of Certified IPC Trainers
CERTIFICATION IPC J-STD-001 CERTIFIED IPC TRAINER (CIT)
Free
What you'll learn
- Cable and wire dimensioning, tolerances and preparation
- Crimp terminations: Stamped and formed contacts and Machined Contacts
- Soldered terminations
- Splices
- Connectorization
- Molding and potting
- Marking and labeling
- Co-ax and twin-ax assembly
- Wire bundle securing
- Shielding
- Testing of Cable/Wire Harness Assemblies
- Skills for teaching the lesson plan effectively
RECERTIFICATION IPC/WHMA-A-620 CERTIFIED IPC TRAINER (CIT)
ETECH-trainingen is the leading training center for IPC training in Europe.
Be the first to hear about our latest courses by signing up to our mailing list.
CC: 75322129
VAT: NL860237801B01
IBAN: NL17RABO0116731974
BIC: RABONL2U
VAT: NL860237801B01
IBAN: NL17RABO0116731974
BIC: RABONL2U
© 2020 ETECH-trainingen
