On-Site training
If you are looking at training several people and a way to reduce the time out of the office, travel and addition expense of sending people to a class, then On-Site Training may be for you.ETECH-Trainingen offers all training course either at our Training Centers or On-Site at your facility. Please Contact our Business Support Team for details on student quantity and material discounts.
Discount
If you have 3 or more attendees or you would like to host an open enrollment class in your area/country, please Contact our Business Support Team for your personal discount.
CERTIFICATION IPC-A-610 CERTIFIED IPC SPECIALIST (CIS)
Course Description
The goal of IPC-A-610 Certified IPC Specialist (CIS) training is to improve an individual’s skill and ability to discriminate between acceptable and unacceptable electronics assemblies. Students don’t just learn when a assembly should be accepted or rejected, they learn the reason why. The IPC-A-610 Certified IPC Specialist Training and Certification Course is an extensive three (3) day paragraph-by-paragraph review of the IPC-A-610 Standard.
Certification
At the conclusion of the Course, students will be subjected to open book written examinations. Students who successfully complete this Course are awarded an IPC-A-610 Certified IPC Specialist Certification valid for two (2) years. For students who have previously achieved their Certified IPC Specialist (CIS) certification within the last two years a relevant Recertification course/training is available.
Who this course is for
The IPC-A-610 Certified IPC Specialist (CIS) training is aimed at anyone needing to understand wether a assembly is acceptable, such as:
- Assembly operators
- Quality assurance inspectors
- Quality Supervisors
- Inbound inspectors
- Assembly manufacturing supervisors
- Production Managers
- Managers and Directors who wants to understand the impact of quality on their products and processes
- Anyone responsible for the quality and reliability of electronics assemblies
-
Module 1 - IPC-A-610G Foreword, Applicable Documents, and Handling (Mandatory)
This mandatory module contains content that applies to all other sections of the document, a listing of applicable documents, and the handling of electronic assemblies.
-
Module 2 (optional) - IPC-A-610G Soldering and High Voltage
This additional knowledge module contains the visual inspection criteria for Soldered connections and high voltage soldered connections. This module is required for students who will also complete modules 4, 5 or 6.
-
Module 3 (optional) - IPC-A-610G Component Damage & PCBs, Cleanliness
This additional knowledge module contains the visual inspection criteria for component damage, PCB damage, and cleanliness of the assemblies. This module is required for students who will also complete modules 4, 5 or 6.
-
Module 4 (optional) - IPC-A-610G Terminals
This additional knowledge module contains the visual inspection criteria for terminal and wire connections to terminals.
-
Module 5 (optional) - IPC-A-610G Through-hole Technology
This additional knowledge module contains the visual inspection criteria for through-hole connections.
-
Module 6 (optional) - IPC-A-610G Surface Mount Technology
This additional knowledge module contains the visual inspection criteria for Surface Mount connections.
-
Module 7 (optional) - IPC-A-610G Hardware
This additional knowledge module contains the visual inspection criteria for hardware and hardware connections used on electronic assemblies.
-
Module 8 (optional) - IPC-A-610G Solderless Wire Wrap
This additional knowledge module contains the visual inspection criteria for solderless wrap connections.
Instructor
0.0
0%
0%
0%
0%
0%
Free
More courses you might like
Free
What you'll learn
- Introduction to frequently-used components
- Use of tools and equipment
- Fitting components to printed circuit boards (PCBs)
- Basic electrostatic discharge (ESD) procedures
- Demonstrate basic hand soldering skills
- Health & Safety in the workshop
Intermediate Soldering Engineer (ISE)
Free
What you'll learn
- ESD Basics
- IEC 61340 vs ANSI ESD S20.20
- Setup an ESD control program
- Dally and Periodically checks
- How to setup a measuring report
- Setup an training program
ESD FOR ESD-COORDINATOR
Free
What you'll learn
- Measure and cut wire/cables, strip, and tin wires.
- Assemble and solder terminals, crimp formed contacts (insulated and non-insulated), crimp stamped/machine contacts.
- Assemble BNC connectors to coaxial cable, RJ45 plugs, and ribbon cable.
- Bundle wires and cables using tie wraps, spot ties and continuous lacing
- Documentation and tutorials will be provided.
CERTIFICATION IPC/WHMA-A-620 CIS HANDS-ON
Free
What you'll learn
-
Visual accept/reject criteria
- Purpose and application of IPC-A-610
- Hardware installation
- Soldering criteria, including lead free connections
- Soldered connection requirements for plated-through holes
- Solder fillet dimensional criteria for all major SMT component groups
- Component mounting criteria for DIPS, socket pins and card edge connectors
- Jumper wire assembly requirements
RECERTIFICATION IPC-A-610 CERTIFIED IPC SPECIALIST (CIS)
ETECH-trainingen is the leading training center for IPC training in Europe.
Be the first to hear about our latest courses by signing up to our mailing list.
CC: 75322129
VAT: NL860237801B01
IBAN: NL17RABO0116731974
BIC: RABONL2U
VAT: NL860237801B01
IBAN: NL17RABO0116731974
BIC: RABONL2U
© 2020 ETECH-trainingen
