On-Site training
If you are looking at training several people and a way to reduce the time out of the office, travel and addition expense of sending people to a class, then On-Site Training may be for you.ETECH-Trainingen offers all training course either at our Training Centers or On-Site at your facility. Please Contact our Business Support Team for details on student quantity and material discounts.
Discount
If you have 3 or more attendees or you would like to host an open enrollment class in your area/country, please Contact our Business Support Team for your personal discount.
CERTIFICATION IPC-A-610 CERTIFIED IPC TRAINER (CIT)
Course Description
Certified IPC Trainer Programs are intended for those who wish to become certified as instructors in different IPC specifications for the electronic assembly industry. The IPC-A-610 Certified IPC Trainer (CIT) Training and Certification Course is an extensive four (4) day paragraph-by-paragraph review of the IPC-A-610 Standard and a review of basic instructor skills.
Certification
At the conclusion of the Course, students will be subjected to open and closed book written examinations. Students who successfully complete this Course are awarded an IPC-A-610 Certified IPC Trainer (CIT) Certification valid for two (2) years and are authorized to conduct the Certified IPC Specialist (CIS) Course. For students who have previously achieved their Certified IPC Trainer (CIT) certification within the last two years a relevant Recertification course/training is available.
Who this course is for
- Our Certified IPC Trainer (CIT) programs are best suited for experienced and skilled electronics technicians, engineers and supervisors who have the will and passion to teach and train colleagues about the quality standards of IPC. They also provide successful candidates with a credential that confirms their knowledge and understanding of IPC quality systems.
- Any person whose responsibility lies in the quality, acceptability and reliability of assemblies including quality assurance engineers and manufacturing supervisors can qualify for this CIT training course.
-
Module 1 - IPC-A-610G Foreword, Applicable Documents, and Handling
This module contains content that applies to all other sections of the document, a listing of applicable documents, and the handling of electronic assemblies.
-
Module 2 - IPC-A-610G Soldering and High Voltage
This knowledge module contains the visual inspection criteria for Soldered connections and high voltage soldered connections. This module is required for students who will also complete modules 4, 5 or 6.
-
Module 3 - IPC-A-610G Component Damage & PCBs, Cleanliness
This knowledge module contains the visual inspection criteria for component damage, PCB damage, and cleanliness of the assemblies. This module is required for students who will also complete modules 4, 5 or 6.
-
Module 4 - IPC-A-610G Terminals
This knowledge module contains the visual inspection criteria for terminal and wire connections to terminals.
-
Module 5 - IPC-A-610G Through-hole Technology
This knowledge module contains the visual inspection criteria for through-hole connections.
-
Module 6 - IPC-A-610G Surface Mount Technology
This knowledge module contains the visual inspection criteria for Surface Mount connections.
-
Module 7 - IPC-A-610G Hardware
This knowledge module contains the visual inspection criteria for hardware and hardware connections used on electronic assemblies.
-
Module 8 - IPC-A-610G Solderless Wire Wrap
This knowledge module contains the visual inspection criteria for solderless wrap connections.
-
Instructor Skills
This knowledge module contains the Skills for teaching the lesson plan effectively.
Instructor
0.0
0%
0%
0%
0%
0%
Free
More courses you might like
Free
What you'll learn
- Measure and cut wire/cables, strip, and tin wires.
- Assemble and solder terminals, crimp formed contacts (insulated and non-insulated), crimp stamped/machine contacts.
- Assemble BNC connectors to coaxial cable, RJ45 plugs, and ribbon cable.
- Bundle wires and cables using tie wraps, spot ties and continuous lacing
- etc.
- Documentation and tutorials will be provided.
Cable and Wiring techniques
Free
What you'll learn
-
Visual accept/reject criteria
- Base material surface and subsurface conditions
- Solder resist coverage over conductors and registration to lands
- Conductor width and spacing and annular ring requirements
- Dielectric material criteria for etchback, voids, and resin recession
- Plated-through hole requirements for copper plating thickness, voids, nodules and cracks
- Acceptance criteria for flexible, rigid-flex and metal core printed boards
CERTIFICATION IPC-A-600 CERTIFIED STANDARD EXPERT (CSE)
Free
What you'll learn
- The fundamentals of ESD
- What is static electricity?
- How does it occur?
- How does ESD affect product quality?
ESD AWARENESS AND PREVENTION (BASICS)
Free
What you'll learn
- Practical soldering skills
- Introduction to frequently-used components
- Use of tools and equipment
- Fitting components to printed circuit boards (PCBs)
- Basic electrostatic discharge (ESD) procedures
- Health & Safety in the workshop
Introduction to Through-Hole Hand Soldering
ETECH-trainingen is the leading training center for IPC training in Europe.
Be the first to hear about our latest courses by signing up to our mailing list.
CC: 75322129
VAT: NL860237801B01
IBAN: NL17RABO0116731974
BIC: RABONL2U
VAT: NL860237801B01
IBAN: NL17RABO0116731974
BIC: RABONL2U
© 2020 ETECH-trainingen
