On-Site training
If you are looking at training several people and a way to reduce the time out of the office, travel and addition expense of sending people to a class, then On-Site Training may be for you.ETECH-Trainingen offers all training course either at our Training Centers or On-Site at your facility. Please Contact our Business Support Team for details on student quantity and material discounts.
Discount
If you have 3 or more attendees or you would like to host an open enrollment class in your area/country, please Contact our Business Support Team for your personal discount.
CERTIFICATION IPC/WHMA-A-620 CIS HANDS-ON
Course Description
The NEW A-620C optional hands-on training has been developed to help users become familiar with the basics of cable and wire harness fabrication.
The Hands-on module is optional for the CIT and CIS. If a CIT wishes to teach the hands-on projects, the CIT would need to complete the extra, 1-day course and complete all the requirements of the projects.
The CIS hands-on training is modular and can be applied to the individual, modular sections of the CIS training. The CIS candidate would need to complete the lecture/discrimination module for his or her certification. Then the CIS candidate would complete only the portion of the hands-on project that applies to the learned material.
Certification
At the conclusion of the Course, students must complete acceptable workmanship samples. Students who successfully complete hands-on project are awarded an IPC/WHMA-A-620 Certified IPC Specialist hands-on Certification valid for two (2) years. For students who have previously achieved their Certified IPC Specialist (CIS) certification within the last two years a relevant Recertification course/training is available.
Who this course is for
- This hands-on training is designed to complement your IPC/WHMA-A-620 training. Participants will learn and practice the techniques necessary to meet the IPC criteria.
-
H1 – Prep (requires M1)
Participants will build a cable assembly by demonstrating, after instruction, the ability to:
-
H2 – Crimp (requires M1 & M2)
Participants will build a cable assembly by demonstrating, after instruction, the ability to:
-
H3 – Soldered Term (requires M1 & M3)
Participants will build a cable assembly by demonstrating, after instruction, the ability to:
-
H4 – Connectorization (requires M1, M2, & M4)
Participants will build a cable assembly by demonstrating, after instruction, the ability to:
-
H5 – Splices (requires M1 & M5)
Participants will build a cable assembly by demonstrating, after instruction, the ability to:
-
H6- Coax (requires M1 & M7)
Participants will build a cable assembly by demonstrating, after instruction, the ability to:
Instructor
0.0
0%
0%
0%
0%
0%
Free
More courses you might like
Free
What you'll learn
- Practical soldering skills
- Fundamentals of soldering SMDs
- Use of tools and equipment
- Fitting components to printed circuit boards (PCBs)
- Basic electrostatic discharge (ESD) procedures
- Health & Safety in the workshop
Introduction to Soldering Surface Mount Devices
Free
What you'll learn
-
Establishing and maintaining integrity of the certification program
- Purpose and application of IPC-A-610
- Hardware installation
- Soldering criteria, including lead free connections
- Soldered connection requirements for plated-through holes
- Solder fillet dimensional criteria for all major SMT component groups
- Component mounting criteria for DIPS, socket pins and card edge connectors
- Jumper wire assembly requirements
RECERTIFICATION IPC-A-610 CERTIFIED STANDARD EXPERT (CSE)
Free
What you'll learn
-
Establishing and maintaining integrity of the certification program
- Purpose and application of IPC-A-610
- Hardware installation
- Soldering criteria, including lead free connections
- Soldered connection requirements for plated-through holes
- Solder fillet dimensional criteria for all major SMT component groups
- Component mounting criteria for DIPS, socket pins and card edge connectors
- Jumper wire assembly requirements
- Skills for teaching the lesson plan effectively
RECERTIFICATION IPC-A-610 CERTIFIED IPC TRAINER (CIT)
Free
What you'll learn
- General requirements, such as safety, tools and electrostatic discharge (ESD)
- Wire and terminal assembly requirements, demonstrations and laboratory
- Through hole technology requirements, demonstrations and laboratory
- Surface mount technology requirements, demonstrations and laboratory
- General soldered connection acceptance requirements (including Lead Free)
- Machine and reflow soldering process requirements
- Test methods and related standards
- Using statistical process control methodology
RECERTIFICATION IPC J-STD-001 CERTIFIED IPC SPECIALIST (CIS)
ETECH-trainingen is the leading training center for IPC training in Europe.
Be the first to hear about our latest courses by signing up to our mailing list.
CC: 75322129
VAT: NL860237801B01
IBAN: NL17RABO0116731974
BIC: RABONL2U
VAT: NL860237801B01
IBAN: NL17RABO0116731974
BIC: RABONL2U
© 2020 ETECH-trainingen
