On-Site training
If you are looking at training several people and a way to reduce the time out of the office, travel and addition expense of sending people to a class, then On-Site Training may be for you.ETECH-Trainingen offers all training course either at our Training Centers or On-Site at your facility. Please Contact our Business Support Team for details on student quantity and material discounts.
Discount
If you have 3 or more attendees or you would like to host an open enrollment class in your area/country, please Contact our Business Support Team for your personal discount.
RECERTIFICATION IPC-A-600 CERTIFIED IPC SPECIALIST (CIS)
Course Description
This one and a half (1,5) day lecture course is for anyone needing to renew their existing IPC-A-600 Specialist Certification. It is required by IPC to re-certify before your 24-month certification expires. This course provides a review study of the accept/reject criteria for all three classes of Printed Boards.
Recertification is required every 24 months. The recertification Training Course can be followed within 6 months prior to the expiration of the certificate.
Certification
At the conclusion of the Course, students will be subjected to open book written examinations. Students who successfully complete this Course are awarded an IPC-A-600 Certified IPC Specialist Certification valid for two (2) years. For students who have previously achieved their Certified IPC Specialist (CIS) certification within the last two years a relevant Recertification course/training is available.
Who this course is for
- Everyone who wants to renew their IPC certificate and who is currently designated as a Certified IPC Specialist with a valid certificate.
-
Module 1 (Mandatory) - Introduction
This mandatory Module contains general content which pertains to all other section of the IPC-A-600J. This module must be successfully completed before certification to any additional knowledge modules may be granted.
-
Module 2 (optional) - Externally Observable Characteristics
This additional knowledge module contains the acceptability criteria for Externally observable conditions of the substrate.
-
Module 3 (optional) - Internally Observable Characteristics
This additional knowledge module contains the acceptability criteria for internally observable conditions of the substrate.
-
Module 4 (optional) - Miscellaneous and Cleanliness
This additional knowledge module contains the acceptability criteria for internally observable conditions of the substrate.
Instructor
0.0
0%
0%
0%
0%
0%
Free
More courses you might like
Free
What you'll learn
- Function of active and passive electronic components
- Basics of conventional (Through-hole) and surface mount assembly processes
- Bill of Materials (BOM) list
- Schematic symbols
- Markings
- Orientation and polarity
Component Identification
Free
What you'll learn
- Cable and wire dimensioning, tolerances and preparation
- Crimp terminations: Stamped and formed contacts and Machined Contacts
- Soldered terminations
- Splices
- Connectorization
- Molding and potting
- Marking and labeling
- Co-ax and twin-ax assembly
- Wire bundle securing
- Shielding
- Testing of Cable/Wire Harness Assemblies
CERTIFICATION IPC/WHMA-A-620 CERTIFIED IPC SPECIALIST (CIS)
Free
What you'll learn
- Measure and cut wire/cables, strip, and crimp wires.
- Crimp formed contacts (insulated and non-insulated), crimp stamped/machine contacts.
- Assemble RJ45 plugs, and ribbon cable.
- Documentation and tutorials will be provided.
Cable and Wire Crimp Termination Operator
Free
What you'll learn
-
Establishing and maintaining integrity of the certification program
- Purpose and application of IPC-A-610
- Hardware installation
- Soldering criteria, including lead free connections
- Soldered connection requirements for plated-through holes
- Solder fillet dimensional criteria for all major SMT component groups
- Component mounting criteria for DIPS, socket pins and card edge connectors
- Jumper wire assembly requirements
RECERTIFICATION IPC-A-610 CERTIFIED STANDARD EXPERT (CSE)
ETECH-trainingen is the leading training center for IPC training in Europe.
Be the first to hear about our latest courses by signing up to our mailing list.
CC: 75322129
VAT: NL860237801B01
IBAN: NL17RABO0116731974
BIC: RABONL2U
VAT: NL860237801B01
IBAN: NL17RABO0116731974
BIC: RABONL2U
© 2020 ETECH-trainingen
