On-Site training
If you are looking at training several people and a way to reduce the time out of the office, travel and addition expense of sending people to a class, then On-Site Training may be for you.ETECH-Trainingen offers all training course either at our Training Centers or On-Site at your facility. Please Contact our Business Support Team for details on student quantity and material discounts.
Discount
If you have 3 or more attendees or you would like to host an open enrollment class in your area/country, please Contact our Business Support Team for your personal discount.
RECERTIFICATION IPC J-STD-001 CERTIFIED IPC SPECIALIST (CIS)
Course Description
This two (2) day lecture course is for anyone needing to renew their existing IPC J-STD-001 Specialist Certification. It is required by IPC to re-certify before your 24-month certification expires. This course provides a review study of rework, repair and modification criteria including hands-on.
Recertification is required every 24 months. The recertification Training Course can be followed within 6 months prior to the expiration of the certificate.
Certification
At the conclusion of the Course, students will be subjected to written open book examinations and must assemble and solder acceptable workmanship samples. Students who successfully complete this Course are awarded an IPC J-STD-001 Certified IPC Specialist Certification valid for two (2) years. For students who have previously achieved their Certified IPC Specialist (CIS) certification within the last two years a relevant Recertification course/training is available.
Who this course is for
- Everyone who wants to renew their IPC certificate and who is currently designated as a Certified IPC Specialist with a valid certificate.
-
Module 1 - Introduction - Basic Requirements (Mandatory)
This module contains the general information about the J-STD-001, basic document use, and process requirements. The content of this section is applicable to all additional knowledge modules in the program. This module must be completed and certified before certification to any additional knowledge modules can be granted.
-
Module 2 - Wire, Terminal Assembly and Soldering
This additional knowledge module begins with lecture which covers process requirements for assembly processes used to fabricate wire and terminal assemblies. The second portion of this additional knowledge module is a hands-on/Practical module in which the students receive instruction and practice for wire preparation and mounting to terminals.
-
Module 3 - Through-Hole Components
This additional knowledge module begins with lecture which covers process requirements for assembly processes used to fabricate through-hole assemblies. The second portion of this additional knowledge module is a hands-on/Practical module in which the students receive instruction and practice for through-hole assemblies.
-
Module 4 - Surface Mounting of Components
This additional knowledge module begins with lecture which covers process requirements for assembly processes used to fabricate surface mount assemblies. The second portion of this additional knowledge module is a hands-on/Practical module in which the students receive instruction and practice for surface mount assemblies.
-
Module 5 - Inspection Criteria
This additional knowledge module begins with lecture which covers process requirements for assembly processes used to fabricate wires and terminals, surface mount assemblies, and through-hole assemblies. The second portion of this additional knowledge module is a hands-on/practical module in which the students receive instruction and practice for inspection of wires and terminals, surface mount assemblies, and through-hole assemblies.
Instructor
0.0
0%
0%
0%
0%
0%
Free
More courses you might like
Free
What you'll learn
- General requirements, such as safety, tools and electrostatic discharge (ESD)
- Wire and terminal assembly requirements, demonstrations and laboratory
- Through hole technology requirements, demonstrations and laboratory
- Surface mount technology requirements, demonstrations and laboratory
- General soldered connection acceptance requirements (including Lead Free)
- Machine and reflow soldering process requirements
- Test methods and related standards
- Using statistical process control methodology
- Instructional skills and the roles and responsibilities of Certified IPC Trainers
CERTIFICATION IPC J-STD-001 CERTIFIED IPC TRAINER (CIT)
Free
What you'll learn
- Cable and wire dimensioning, tolerances and preparation
- Crimp terminations: Stamped and formed contacts and Machined Contacts
- Soldered terminations
- Splices
- Connectorization
- Molding and potting
- Marking and labeling
- Co-ax and twin-ax assembly
- Wire bundle securing
- Shielding
- Testing of Cable/Wire Harness Assemblies
RECERTIFICATION IPC/WHMA-A-620 CERTIFIED IPC SPECIALIST (CIS)
Free
What you'll learn
- Measure and cut wire/cables, strip, and tin wires.
- Assemble and solder terminals, crimp formed contacts (insulated and non-insulated), crimp stamped/machine contacts.
- Assemble BNC connectors to coaxial cable, RJ45 plugs, and ribbon cable.
- Bundle wires and cables using tie wraps, spot ties and continuous lacing
- Documentation and tutorials will be provided.
RECERTIFICATION IPC/WHMA-A-620 CIS HANDS-ON
Free
What you'll learn
- Cable and wire dimensioning, tolerances and preparation
- Crimp terminations: Stamped and formed contacts and Machined Contacts
- Soldered terminations
- Splices
- Connectorization
- Molding and potting
- Marking and labeling
- Co-ax and twin-ax assembly
- Wire bundle securing
- Shielding
- Testing of Cable/Wire Harness Assemblies
RECERTIFICATION IPC/WHMA-A-620 CERTIFIED STANDARD EXPERT (CSE)
ETECH-trainingen is the leading training center for IPC training in Europe.
Be the first to hear about our latest courses by signing up to our mailing list.
CC: 75322129
VAT: NL860237801B01
IBAN: NL17RABO0116731974
BIC: RABONL2U
VAT: NL860237801B01
IBAN: NL17RABO0116731974
BIC: RABONL2U
© 2020 ETECH-trainingen
