RECERTIFICATION IPC J-STD-001 CERTIFIED IPC TRAINER (CIT)

Duration 2 days
Skill Level Trainer

0 student

Course Description

This two (2) day lecture course is for anyone needing to renew their existing IPC J-STD-001 Instructor Certification. It is required by IPC to re-certify before your 24-month certification expires. If your certification expires, you will not be certified to conduct Application Specialist courses until you are re-certified. This course provides a review study of the accept/reject criteria for all three classes of electronic assemblies.

Recertification is required every 24 months. The recertification Training Course can be followed within 6 months prior to the expiration of the certificate.

Certification

At the conclusion of the Course, students will be subjected to written open and closed book examinations and must assemble and solder acceptable workmanship samples. Students who successfully complete this Course are awarded an IPC J-STD-001 Certified IPC Trainer Certification valid for two (2) years. For students who have previously achieved their Certified IPC Trainer (CIT) certification within the last two years a relevant Recertification course/training is available.

Who this course is for

Everyone who wants to renew their IPC certificate and who is currently designated as a Certified IPC Trainer (CIT) with a valid certificate.

Module 1 - Introduction - Basic Requirements

This module contains the general information about the J-STD-001, basic document use, and process requirements. The content of this section is applicable to all additional knowledge modules in the program. This module must be completed and certified before certification to any additional knowledge modules can be granted.

6
Module 2 - Wire, Terminal Assembly and Soldering

This knowledge module begins with lecture which covers process requirements for assembly processes used to fabricate wire and terminal assemblies. The second portion of this additional knowledge module is a hands-on/Practical module in which the students receive instruction and practice for wire preparation and mounting to terminals.

2
- The basics of swaging terminals to PCBs
- Attachment of wires to terminals
Module 3 - Through-Hole Components

This knowledge module begins with lecture which covers process requirements for assembly processes used to fabricate through-hole assemblies. The second portion of this additional knowledge module is a hands-on/Practical module in which the students receive instruction and practice for through-hole assemblies.

2
- Details of the forming and placement of through-hole components on circuit boards
- Soldering criteria of through-hole components
Module 4 - Surface Mounting of Components

This knowledge module begins with lecture which covers process requirements for assembly processes used to fabricate surface mount assemblies. The second portion of this additional knowledge module is a hands-on/Practical module in which the students receive instruction and practice for surface mount assemblies.

2
- Placement of the surface mount components to a PCB/flex circuit
- solder requirements of the surface mount components
Module 5 - Inspection Criteria

This knowledge module begins with lecture which covers process requirements for assembly processes used to fabricate wires and terminals, surface mount assemblies, and through-hole assemblies. The second portion of this additional knowledge module is a hands-on/practical module in which the students receive instruction and practice for inspection of wires and terminals, surface mount assemblies, and through-hole assemblies.

2
- Inspection criteria from modules 2, 3 & 4
- Process control methodologies such as sample inspections
Instructor Skills

This knowledge module contains the Skills for teaching the lesson plan effectively.

1
- Skills for teaching the lesson plan effectively

Instructor

admin

0.0

Course Rating

Free

RECERTIFICATION IPC J-STD-001 CERTIFIED IPC TRAINER (CIT)

Preview this course

Free

Enroll This Course

On-Site training
If you are looking at training several people and a way to reduce the time out of the office, travel and addition expense of sending people to a class, then On-Site Training may be for you.
ETECH-Training offers all training course either at our Training Centers or On-Site at your facility. Please Contact our Business Support Team for details on student quantity and material discounts.
Discount
If you have 3 or more attendees or you would like to host an open enrollment class in your area/country, please Contact our Business Support Team for your personal discount.