Learn how to

Looking for an initial certification course or renew your existing certification with a recertification course? Find out more in our online catalog.
IPC Training
PCB Fabrication
Manufacturing & Production
Cable & Wiring
ESD
(Hand) Soldering
Remote Training
What you'll learn
  • Product classifications, skill levels, tools and materials
  • Basic surface mount and through hole component removal
  • Land preparation and component installation
  • Primary heating methods: conductive, convective and others
  • Handling electronic assemblies
  • Wire splicing procedures
  • Through hole component removal and installation
  • Chip and MELF rework procedures
  • SOIC/SOT, J-lead and QFP rework
  • Printed wiring board circuit and laminate repair
  • Conformal coating removal

CERTIFICATION IPC 7711/7721 CERTIFIED IPC SPECIALIST (CIS)

Rework, Modify and Repair Electronic Assemblies for Application...
What you'll learn
  • PBGA and CBGA Component Identification
  • Terms and definitions
  • Developing removal/replacement profiles
  • Inspection
  • Re-balling techniques
  • Hands-on soldering/desoldering techniques

BGA Inspection, Rework and Repair

Course Description If BGA rework requires the removal of the component, special considerations must...
What you'll learn
  • Product classifications, skill levels, tools and materials
  • Basic surface mount and through hole component removal
  • Land preparation and component installation
  • Primary heating methods: conductive, convective and others
  • Handling electronic assemblies
  • Wire splicing procedures
  • Through hole component removal and installation
  • Chip and MELF rework procedures
  • SOIC/SOT, J-lead and QFP rework
  • Printed wiring board circuit and laminate repair
  • Conformal coating removal

RECERTIFICATION IPC 7711/7721 CERTIFIED IPC SPECIALIST (CIS)

Rework, Modify and Repair Electronic Assemblies for Application...
What you'll learn
  • Terms and definitions
  • Convective and IR heating
  • Developing removal/replacement profiles
  • Use of thermal coupling device

BGA Profiling

Course Description This one (1) day engineering level course is structured to teach the student how...
What you'll learn
  • Product classifications, skill levels, tools and materials
  • Basic surface mount and through hole component removal
  • Land preparation and component installation
  • Primary heating methods: conductive, convective and others
  • Handling electronic assemblies
  • Wire splicing procedures
  • Through hole component removal and installation
  • Chip and MELF rework procedures
  • SOIC/SOT, J-lead and QFP rework
  • Printed wiring board circuit and laminate repair
  • Conformal coating removal
  • Skills for teaching the lesson plan effectively

CERTIFICATION IPC 7711/7721 CERTIFIED IPC TRAINER (CIT)

Rework, Modify and Repair Electronic Assemblies for Certified IPC...
What you'll learn
  • General requirements, such as safety, tools and electrostatic discharge (ESD)
  • Wire and terminal assembly requirements, demonstrations and laboratory
  • Through hole technology requirements, demonstrations and laboratory
  • Surface mount technology requirements, demonstrations and laboratory
  • General soldered connection acceptance requirements (including Lead Free)
  • Machine and reflow soldering process requirements
  • Test methods and related standards
  • Using statistical process control methodology

CERTIFICATION IPC J-STD-001 CERTIFIED IPC SPECIALIST (CIS)

Requirements for Soldered Electrical and Electronic Assemblies for Application...
What you'll learn
  • General requirements, such as safety, tools and electrostatic discharge (ESD)
  • Wire and terminal assembly requirements, demonstrations and laboratory
  • Through hole technology requirements, demonstrations and laboratory
  • Surface mount technology requirements, demonstrations and laboratory
  • General soldered connection acceptance requirements (including Lead Free)
  • Machine and reflow soldering process requirements
  • Test methods and related standards
  • Using statistical process control methodology
  • Instructional skills and the roles and responsibilities of Certified IPC Trainers

CERTIFICATION IPC J-STD-001 CERTIFIED IPC TRAINER (CIT)

Requirements for Soldered Electrical and Electronic Assemblies for Certified IPC...
What you'll learn
  • General requirements, such as safety, tools and electrostatic discharge (ESD)
  • Wire and terminal assembly requirements, demonstrations and laboratory
  • Through hole technology requirements, demonstrations and laboratory
  • Surface mount technology requirements, demonstrations and laboratory
  • General soldered connection acceptance requirements (including Lead Free)
  • Machine and reflow soldering process requirements
  • Test methods and related standards
  • Using statistical process control methodology

RECERTIFICATION IPC J-STD-001 CERTIFIED IPC SPECIALIST (CIS)

Requirements for Soldered Electrical and Electronic Assemblies for Application...
What you'll learn
  • General requirements, such as safety, tools and electrostatic discharge (ESD)
  • Wire and terminal assembly requirements, demonstrations and laboratory
  • Through hole technology requirements, demonstrations and laboratory
  • Surface mount technology requirements, demonstrations and laboratory
  • General soldered connection acceptance requirements (including Lead Free)
  • Machine and reflow soldering process requirements
  • Test methods and related standards
  • Using statistical process control methodology
  • Instructional skills and the roles and responsibilities of Certified IPC Trainers

RECERTIFICATION IPC J-STD-001 CERTIFIED IPC TRAINER (CIT)

Requirements for Soldered Electrical and Electronic Assemblies for Certified IPC...
What you'll learn
  • Measure and cut wire/cables, strip, and tin wires.
    • Assemble and solder terminals, crimp formed contacts (insulated and non-insulated), crimp stamped/machine contacts.
    • Assemble BNC connectors to coaxial cable, RJ45 plugs, and ribbon cable.
    • Bundle wires and cables using tie wraps, spot ties and continuous lacing
    • etc.
  • Documentation and tutorials will be provided.

Cable and Wiring techniques

Course Description This training Cable and Wiring techniques provides an introduction to the wire...
What you'll learn
  • Measure and cut wire/cables, strip, and tin wires.
    • Assemble and solder terminals.
    • Assemble sub D connectors.
    • Bundle wires and cables using tie wraps, spot ties and continuous lacing.
  • Documentation and tutorials will be provided.

Cable and Wire Solder Termination Operator

Course Description ETECH’s Solder Termination Class is a one (1) day hands-on course for...
What you'll learn
  • Practical soldering skills
  • Introduction to frequently-used components
  • Use of tools and equipment
  • Fitting components to printed circuit boards (PCBs)
  • Basic electrostatic discharge (ESD) procedures
  • Health & Safety in the workshop

Introduction to Through-Hole Hand Soldering

Course Description ETECH’s Introduction to Through-Hole Hand Soldering is a one (1) day...
What you'll learn
  • Practical reworking skills and techniques
  • Use of tools and equipment
  • PCB Types and Construction
  • Basic electrostatic discharge (ESD) procedures
  • Health & Safety in the workshop

Rework of Through-Hole

Course Description ETECH’s Rework of Through-Hole is a two (2) day hands-on course for...
What you'll learn
  • Practical soldering skills
  • Fundamentals of soldering SMDs
  • Use of tools and equipment
  • Fitting components to printed circuit boards (PCBs)
  • Basic electrostatic discharge (ESD) procedures
  • Health & Safety in the workshop

Introduction to Soldering Surface Mount Devices

Course Description ETECH’s Introduction to Soldering Surface Mount Devices is a one (1) day...
What you'll learn
  • Practical reworking skills and techniques
  • Use of tools and equipment
  • PCB Types and Construction
  • Basic electrostatic discharge (ESD) procedures
  • Health & Safety in the workshop

Rework of Surface Mount Devices (SMD)

Course Description ETECH’s Rework of Surface Mount Devices (SMD) is a two (2) day hands-on...
What you'll learn
  • Introduction to frequently-used components
  • Use of tools and equipment
  • Fitting components to printed circuit boards (PCBs)
  • Basic electrostatic discharge (ESD) procedures
  • Demonstrate basic hand soldering skills
  • Health & Safety in the workshop

Intermediate Soldering Engineer (ISE)

Course Description ETECH’s Intermediate Soldering Engineer (ISE) is a two (2) day hands-on...


Page 1 of 2

Loading...
X